Phanteks goes mini with its Eclipse P200A ITX case - trevinopopop1971

A new addition to Phantek's Eclipse lineup of middle-towboa cases aims to tempt fans of weensy PC builds. Declared Thursday, the Overshadow P200A shrinks the company's airflow-focused cases down pat to a miniskirt-tower that accommodates ITX and DTX motherboards solely, with an equally tiny opening price of conscionable $50. An upgraded model with RGB lighting and tempered glass comes in at a restrained $70.

Some miniskirt-ITX builders might sit up at that forward cost, as the cheapest small cases hover around $100. Not every PC using an ITX board seeks to take astir as little space possible, after all—so while inferior-physique-factor enthusiasts may shun the Phanteks Eclipse P200A for beingness "oversized" at 30L, DIYers itching to create a showy even diminutive rig will have room to stuff in gobs of hardware.

Going past the specs, you really can pack quite bit into the P200A Performance and its fancier D-RGB variant. This case's star attraction is the graphics card support: the P200A takes triple-slot GPUs sprouted to 355mm in length and 65mm in thickness when adorned horizontally. That exploit outdoes its nearest rival, the $90 NZXT H210, which is about the same size of it as the Occult P200A just only supports dual-slot cards.

Phanteks

The Phanteks Eclipse P200A measures 8.1 x 14.4 x 15.7 inches (205 x 365 x 400 mm).

But not only do chonky video card game fit, they can also be mounted vertically: Phanteks includes the bracket needed for a vertically mounted 3-time slot GPU. Notwithstandin, you will need to buy a riser cablegram severally. (Note: For this configuration, you convey a little less space to work with—60mm syrupy cards are the limit point.) Both the Performance and the D-RGB versions of the Eclipse P200A show off vertically mounted graphics cards nicely, too, as the alkali simulation has a small windowed section in its otherwise solid left-side panel, and the RGB model's port-side panel is pure tempered deoxyephedrine.

Cooling is also a large priority for this tiny case. Capable seven fans can be mounted—either each 120mm or two 140mm plus Phoebe 120mm—plus radiators at the front (equal to 280mm), side (up to 240mm), and rear (120mm). Fans of air-cooled CPUs get 165mm to cultivate with when the GPU is horizontally mounted, and either 72mm or 92mm with a vertically decorated card conditional which PCIe slots are inhabited.

This case also comfortably houses full-sized ATX power supplies, with a recommended headroom of 190mm and a maximum clearance of 205mm for length. For computer storage, you can put in busy four 2.5-inch SSDs and capable four 3.5-in HDDs aft the purchase of optional brackets, depending on your configuration.

Phanteks

Not only does the P200A ingest enough room to stuff in bunches of hardware, it packs value, too—its $50 and $70 variants some include 2 preinstalled fans.

Ports are the only oddly minimal thing well-nig the P200A. The Execution version comes with just two USB 3.0 Character-A ports, a combo mike/headphone jack, and power button. The swankier D-RGB model gains an additional USB 3.1 10Gbps Gen 2 Eccentric-C port, plus buttons to mastery the color and lighting gist of the ARGB fans.

While the lack of micro-ATX motherboard confirm in a subject of this size of it is a trifle amazing, the Phanteks Overshadow P200A's spacious interior seems symptomless-suited for mini-ITX builds that want to mimic the look of big builds without replicating their footprint—or their high cost. The P200A is notably cheaper than its rivals, As both models let in two 120mm fans. The Performance version comes with cardinal 120mm PWM fans as part of the $50 sticker price, while the D-RGB version's $70 MSRP includes a tempered glass over panel, a wider assortment of front panel I/O, and two 120mm ARGB PWM fans.

Source: https://www.pcworld.com/article/394447/phanteks-goes-mini-with-its-eclipse-p200a-itx-case.html

Posted by: trevinopopop1971.blogspot.com

Share this post